Siser EasyWeed Adhesive HTV 12" x 12" sheet
EasyWeed Adhesive is CPSIA Certified, so it can be used for decorating children’s clothing and apparel.
Just like the materials in the EasyWeed Family, EasyWeed Adhesive HTV has a carrier side and a material side. The carrier side is noticeably smoother and shinier than the material side. Now you may notice the material side looks like it doesn’t have any, well, material. That’s because it’s simply a layer of mostly transparent glue. Not just any glue though, EasyWeed Adhesive HTV! EasyWeed Adhesive can not only be used with screen printing foils, it also works with fabrics and other materials that lend themselves to adhesion.
EasyWeed Adhesive can be cut on any vinyl cutter and requires the typical steps before cutting Siser heat transfer vinyl. Make sure to mirror your design and place the carrier side face down on the cutting mat. Then make sure you pin the image below so you can always find your cut settings! I always recommend a test cut before cutting a full design. How old your blade is will effect your blade and cut settings, so make sure your blade produces a good cut with our suggested settings or make some adjustments.
- 100% cotton
• Poly/cotton blends
• 100% polyester
How to Apply:
- Cut in reverse and weed design
• Preheat garment for 2-3 seconds
• Apply design at 275°F/135°C
• Use medium pressure for 5 seconds
• Peel carrier hot or cold. Apply top layer
- Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent
• Do not bleach or dry clean
• Hang item to dry
Blade: Composition: Microns/Mills:
45°/60° PET 75/2.95